how to install a washing machine uk

Make sure both sides are fastened tight. Switch off your old machine.

What Is The Best Washing Machine Temperature Domex Ltd

Getting the new machine.

. If you do decide to install a washing machine yourself here are the four basic steps you should take. Straight forward step by step guide on how to plumb in and install a new washing machine. Cold water inlet pipe connected to the mains water supply.

Then take the drain hose thats attached to the washing machine and. Turn off the water and unplug. Have you recently purchased a Beko washing machine and are trying to install it yourself.

Attaching the inlet pipe to the washing machine. They both come with hoses - normally 15m long with hand-tightened screw connectors on each end. To install a washing machine start by connecting the water supply hose to your new washing machine.

Removing and disposing of your old machine. Carefully lay the machine on its side on a flat surface or follow manufacturers instructions in the pack you will have with the new washer and install feet to bottom of washing machine using. Washing machines need hot and cold water supplies.

Connect the other end of the mains inlet hose to the mains supply. Screw in the cold water-in-pipe at the top of the back of your machine and then screw the other end to your cold-water supply. Follow the makers instructions to fit.

Weve put together this handy how-to guide to help you. You will need to screw a 34 inch blank nut on the old hot washing machine valve after removing the hose to make sure it does not leak or accidentally get opened in the future. First up check your old machine for any clothes inside and unplug it from the mains.

Installing a washing machine.

Diy Need To Connect A Dishwasher To Pipes Under The Sink With Washing Machine Uk R Plumbing